The SmallRig Field Monitor Mount Holder review is for camera operators who want a compact way to position a 5- or 7-inch monitor on a camera cage or handle.
Its cold shoe base, 180-degree tilt, and 360-degree swivel give a rig flexible viewing angles, with tension adjustments that call for a little care.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact, adjustable mount for camera operators who want to position a 5- or 7-inch field monitor from a cage or handle cold shoe.
- Designed for 5- and 7-inch camera monitors, with a cold shoe base for mounting on compatible camera cages or handles.
- Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
- Tilt tension adjusts by thumbscrew; swivel tension adjusts with the included Allen wrench.
- Spring-loaded locating pins at the top and a silicone pad are designed to help secure compatible monitors and guard against scratching or twisting.
Pros
- Combines cold shoe mounting with a 1/4-inch-20 top screw and bottom threaded hole.
- Provides wide tilt and swivel adjustment for directing a monitor toward the operator.
Consider before buying
- Swivel tension adjustment requires the supplied Allen wrench, so angle changes involve a tool.
- The allowable load changes with tilt angle, making the relevant limit important when positioning a heavier monitor.
Read the full review summary
This mount combines a cold shoe base with a 1/4-inch-20 screw on top, so it can support a monitor directly from a compatible cage or handle while also accommodating accessories such as a microphone or light.
A second 1/4-inch-20 threaded hole on the bottom allows connection to a magic arm or stabilizer, giving the small holder more than one place in a rig.
The appeal is the combination of a compact footprint, adjustable viewing angle, and anti-twist details. Spring-loaded locating pins and a silicone pad are intended to help secure compatible monitors and protect against scratching or twisting.
It suits camera users who want direct mounting and quick tilt adjustment; those building a longer-reach setup or positioning heavier gear should check the load limits at their chosen angle before buying.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
It offers 180-degree tilt and 360-degree swivel, covering a broad range of monitor viewing positions.
Tension control
Tilt tension adjusts with a thumbscrew, while swivel tension uses the included Allen wrench.
Mounting flexibility
The cold shoe base, top 1/4-inch-20 screw, and bottom threaded hole support several common rig connections.
Monitor security features
Locating pins and a silicone pad are designed to help reduce monitor movement and surface scratching.
Payload guidance
Angle-specific maximums are provided, though buyers need to match the payload to their actual tilt position.
Compactness
Its folded dimensions are 78 by 67 by 42 mm and its listed weight is 76 g.
Key Features and Specifications of SmallRig Monitor Mount
- Designed for 5- and 7-inch camera monitors, with a cold shoe base for mounting on compatible camera cages or handles.
- Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
- Tilt tension adjusts by thumbscrew; swivel tension adjusts with the included Allen wrench.
- Spring-loaded locating pins at the top and a silicone pad are designed to help secure compatible monitors and guard against scratching or twisting.
- The top 1/4-inch-20 screw can attach a monitor, microphone, light, or other compatible accessory.
- A bottom 1/4-inch-20 threaded hole allows attachment to a magic arm or stabilizer.
- Maximum load depends on tilt angle: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees. The 1/4-inch knurled screw should be retightened with the Allen wrench for additional security.
Pros and Cons of SmallRig Monitor Mount
Pros
- Combines cold shoe mounting with a 1/4-inch-20 top screw and bottom threaded hole.
- Provides wide tilt and swivel adjustment for directing a monitor toward the operator.
- Thumbscrew tilt adjustment avoids needing the Allen wrench for that change.
- Locating pins and a silicone pad add monitor-contact and anti-twist features.
- Compact and light, with a listed weight of 76 g.
Consider before buying
- Swivel tension adjustment requires the supplied Allen wrench, so angle changes involve a tool.
- The allowable load changes with tilt angle, making the relevant limit important when positioning a heavier monitor.
- The holder is designed for direct mounting; buyers who need to place a monitor farther from the camera may prefer a separate arm setup.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider it if you want a small mount for a 5- or 7-inch monitor and your cage or handle has a compatible cold shoe.
The broad tilt and swivel movement can help you orient the screen for different camera positions, while the top screw and bottom threaded hole offer useful ways to integrate other rig components.
It is especially suitable for a setup where keeping the monitor close to the camera matters.
Before choosing it, compare your monitor and any attached accessories with the stated load limit for the angle you plan to use, then check that the cage or handle connection fits your rig.
Who should skip it
Look elsewhere if your setup needs a long extension arm to move the monitor away from the camera; this holder is a compact direct-mount design.
Choose a different mounting approach if your monitor load exceeds the limit for your intended tilt angle or if you need tension adjustments without an Allen wrench.
How the SmallRig Monitor Mount Fits a Camera Rig
Direct cold shoe mounting
A cold shoe base makes this holder a natural fit for a cage or handle with a compatible shoe.
The top screw supports a monitor or another accessory, while the bottom threaded hole gives users an alternate connection point for a magic arm or stabilizer.
Check the mounting points on both the camera rig and accessory before settling on a configuration.
Angle range and tension
The holder can tilt up to 180 degrees and swivel through 360 degrees, allowing the screen to be turned toward different viewing positions. Tilt tension is adjusted with a thumbscrew, while swivel tension uses the included Allen wrench.
That split is useful to understand if you often change the screen position while working.
Monitor contact and load limits
Locating pins and a silicone pad are designed to help the monitor resist twisting and avoid contact scratches.
The permitted payload also varies by tilt angle, so the capacity at the position you intend to use matters more than a single maximum figure. Retightening the knurled screw with the Allen wrench is recommended for additional security.
A compact role in the setup
At 76 g with a folded size of 78 by 67 by 42 mm, the holder takes up little space in a camera kit.
Its design favors mounting a screen close to the cage or handle; if your preferred viewing position requires more reach, confirm that a separate arm arrangement is a better match.
Alternatives to SmallRig Monitor Mount
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
Choose the SmallRig Monitor Mount for a direct cold shoe connection and a dedicated compact monitor holder.
Consider the 1138 if you need to clamp gear onto a rod, tube, table, or frame and want a broader mounting setup.
- The 1138 combines a super clamp and double ball head with a 1/4-inch-20 screw, letting it attach cameras, monitors, lights, microphones, or action cameras to a rod, tube, table, frame, or tripod.
- Its listed capacity is up to 1.5 kg.
- The SmallRig Monitor Mount is a compact direct cold shoe holder with 180-degree tilt, 360-degree swivel, and angle-dependent payload limits.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
Choose the SmallRig Monitor Mount for a compact direct mount. The 2732 kit is a better fit when you need the monitor farther from its support or need a clamp and longer articulated reach.
- The 2732 kit includes a 9.8-inch articulating arm with 1/4-inch screws and a clamp that accepts surfaces from 15 to 54 mm.
- Its double ball-head design rotates 360 degrees, and the kit also has 1/4-inch and 3/8-inch threads.
- The SmallRig Monitor Mount positions a monitor close to a cold shoe or can connect through its bottom 1/4-inch-20 threaded hole.
Is SmallRig Monitor Mount Worth It?
The SmallRig Field Monitor Mount Holder is worth considering for a compact camera rig that needs a dedicated 5- or 7-inch monitor position.
Its cold shoe base, broad angle adjustment, and monitor-contact features make it a versatile direct-mount option.
Check the load limit at your intended tilt angle and confirm your rig's mounting points before buying. The Allen wrench is needed for swivel tension changes, and users who need longer reach should consider an arm-and-clamp design instead.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact, adjustable mount for camera operators who want to position a 5- or 7-inch field monitor from a cage or handle cold shoe.
- Designed for 5- and 7-inch camera monitors, with a cold shoe base for mounting on compatible camera cages or handles.
- Tilts through 180 degrees and swivels through 360 degrees for monitor positioning.
- Tilt tension adjusts by thumbscrew; swivel tension adjusts with the included Allen wrench.
- Spring-loaded locating pins at the top and a silicone pad are designed to help secure compatible monitors and guard against scratching or twisting.