Product Reviews

SmallRig Super Clamp Review: A Compact Mount for Camera Accessories

A compact clamp for camera hobbyists who need a flexible attachment point on compatible rods, shelves, or other firm supports.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Super Clamp is a compact way to attach compatible camera accessories to a range of firm supports.

This SmallRig Super Clamp review looks at its jaw range, threaded mounting points, and practical limits to help you decide whether it fits your rig.

SmallRig Super Clamp Review Summary

The quick verdict

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for camera hobbyists who need a flexible attachment point on compatible rods, shelves, or other firm supports.

  • Adjustable jaw opens to about 40 mm and has a stated minimum opening of 15 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Designed to clamp to supports such as hooks, shelves, plate glass, and crossbars, provided they fit its jaw range.
  • Constructed from aluminum alloy and stainless steel.

Pros

  • Combines a compact clamp with two common accessory thread sizes.
  • The stated 15–40 mm jaw range gives buyers a clear way to check fit against a potential support.

Consider before buying

  • The 15–40 mm jaw range limits which supports it can grip; measure the intended mounting point before buying.
  • The stated 3.3-pound maximum recommendation calls for care with heavier equipment or accessories that extend far from the clamp.
Read the full review summary

This clamp combines a jaw that opens from 15 mm to about 40 mm with 1/4-inch and 3/8-inch threaded holes for attaching accessories.

Its aluminum alloy and stainless steel construction, plus rubber pads at the clamp surfaces, make it a straightforward option for building a small mounting point around a camera setup.

It suits hobbyists and video makers who want a compact clamp for compatible bars, shelves, hooks, or similar surfaces and already have an accessory that can connect to its threads.

The stated maximum weight recommendation is 3.3 pounds, so buyers should consider the complete mounted setup and how much movement or leverage it will create before choosing it.

The buying factors

SmallRig Super Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

The clamp can attach to multiple kinds of supports, while its 1/4-inch and 3/8-inch threaded holes accommodate compatible accessories.

7/10

Jaw range

The 15–40 mm range covers many modest support sizes, though larger or thinner surfaces fall outside the stated dimensions.

8/10

Accessory connections

Two common thread sizes give the clamp useful options for compatible camera rig accessories.

7/10

Grip protection

Rubber pads are intended to reduce slipping and scratching at the contact points; proper fit and secure tightening still matter.

8/10

Portability

At 0.13 kg and described as compact, it should be convenient to keep with a small camera kit.

6/10

Load suitability

The stated maximum weight recommendation is 3.3 pounds, making it important to check the assembled load and mounting position.

Key Features and Specifications of SmallRig Super Clamp

  • Adjustable jaw opens to about 40 mm and has a stated minimum opening of 15 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Designed to clamp to supports such as hooks, shelves, plate glass, and crossbars, provided they fit its jaw range.
  • Constructed from aluminum alloy and stainless steel.
  • Rubber pads at the clamp surfaces are intended to help prevent slipping and scratching.
  • Weighs 0.13 kg, with a stated maximum weight recommendation of 3.3 pounds.
  • Package includes one super clamp.

Pros and Cons of SmallRig Super Clamp

Pros

  • Combines a compact clamp with two common accessory thread sizes.
  • The stated 15–40 mm jaw range gives buyers a clear way to check fit against a potential support.
  • Rubber pads are designed to protect contact surfaces and improve grip.
  • Its 0.13 kg weight is modest for a small rig accessory.

Consider before buying

  • The 15–40 mm jaw range limits which supports it can grip; measure the intended mounting point before buying.
  • The stated 3.3-pound maximum recommendation calls for care with heavier equipment or accessories that extend far from the clamp.
  • A compatible ball head or articulating arm is not included, so check whether your accessory connects directly or requires another part.

Who Should Buy SmallRig Super Clamp?

Good fit

Consider it if you need a small clamp to add an attachment point to a support that measures between 15 and 40 mm thick.

The 1/4-inch and 3/8-inch threads make it useful when your camera accessory already has a matching connection or can be adapted to one.

It may also suit a hobby workspace where you want to position a compatible light or camera accessory on a shelf edge, crossbar, or other appropriately sized support.

Check the fit, the complete equipment weight, and the amount of leverage the setup will place on the clamp before mounting.

Who should skip it

Choose another mounting approach if your support is outside the stated jaw range or if the full mounted setup exceeds the 3.3-pound maximum weight recommendation.

If you need an arm for positioning an accessory away from the clamp, verify that you have a compatible arm or plan to obtain one separately.

How the SmallRig Super Clamp Fits a Compact Camera Rig

Check the support before planning the rig

The jaw range is central to whether this clamp will work in a particular setup.

Measure the support where the clamp will sit, including any surface shape that could affect contact, and compare it with the 15–40 mm range.

This helps avoid choosing a clamp that cannot close around the intended bar or shelf edge.

Threads make the clamp an attachment point

The 1/4-inch and 3/8-inch threaded holes let the clamp connect with compatible accessories.

That flexibility is useful when an existing component matches one of those thread sizes, but the clamp itself is not described as including a ball head or arm.

Plan the connection between the clamp and the device before assembling a rig.

Consider the whole mounted load

The product carries a stated maximum weight recommendation of 3.3 pounds.

Buyers should account for every attached component and consider how far it extends from the support: a setup that projects outward can place a different demand on the clamp than a compact, close-mounted accessory.

Keep the assembly within the recommendation and confirm that it remains secure after positioning.

Pads and materials suit practical mounting use

Aluminum alloy and stainless steel form the clamp body, while rubber pads at the contact surfaces are intended to reduce slipping and scratching.

These details support a reusable mounting role, although the fit still depends on the support and secure tightening. If the surface is delicate, inspect the contact area and test the grip carefully before adding equipment.

Alternatives to SmallRig Super Clamp

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit

Choose the kit if you need both a clamp and an articulating arm to position an accessory, or need the wider stated jaw opening.

The main clamp is the simpler fit if your support is within its range and you already have a compatible way to mount the accessory.

  • This kit includes a super clamp with a jaw range of 15–54 mm and a 9.8-inch articulating arm with 1/4-inch screws at both ends.
  • Its double ball head design allows 360-degree adjustment.
  • The SmallRig Super Clamp has 1/4-inch and 3/8-inch threaded holes and a 15–40 mm jaw range, but the package includes only the clamp.

Camera Mounts & Clamps alternative

SmallRig Double Clamp Mount 4103
4.6/5

800+ ratings

Read Amazon Reviews

SmallRig Double Clamp Mount 4103

Consider the Double Clamp Mount if your setup needs two clamping points, a wider stated diameter range, and an adjustable double ball head.

The reviewed clamp is the more compact choice for a single support and a direct threaded accessory connection.

  • The 4103 has two clamps with a stated 14–60 mm rod diameter range and a 360-degree double ball head. Its stated maximum load capacity is 3.5 kg.
  • The reviewed clamp has one adjustable jaw with a 15–40 mm range and threaded holes for mounting compatible accessories.

Is SmallRig Super Clamp Worth It?

The SmallRig Super Clamp is worth considering for a compact camera rig when the support fits its 15–40 mm jaw range and the accessory matches one of its threaded connections.

Its rubber pads and metal construction make it a practical mounting point for compatible equipment.

Before buying, check the full assembly against the 3.3-pound maximum weight recommendation and decide whether you also need an arm or other positioning hardware.

It is a focused, lightweight clamp for modest setups rather than a complete articulated mount.

Your review at a glance

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for camera hobbyists who need a flexible attachment point on compatible rods, shelves, or other firm supports.

  • Adjustable jaw opens to about 40 mm and has a stated minimum opening of 15 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Designed to clamp to supports such as hooks, shelves, plate glass, and crossbars, provided they fit its jaw range.
  • Constructed from aluminum alloy and stainless steel.

Written by

oldradiobuilder.com Editorial Team

Editorial team

Independent editorial coverage of radio history & electronics hobbies.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Super Clamp

SmallRig Super Clamp

A compact clamp for camera hobbyists who need a flexible attachment point on compatible rods, shelves, or other firm supports.

  • Adjustable jaw opens to about 40 mm and has a stated minimum opening of 15 mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
Check Video Reviews on Amazon